Talk to us on
- K738 White Viton Gasket Type 1
- K837 Nitrile Gasket Type 1
- K852 EPDM Gasket Type 1
- K839 Silicone Gasket Platinum Cured Type 1
- K829 Solid Teflon Gasket
- K831 Envelope Gasket Viton Inner K828 Envelope Gasket EPDM Inner
- K737 White Viton Gasket Type 2
- K834 Green Viton Gasket Type 2
- K830 Nitrile Gasket Type 2
- K832 EPDM Gasket Type 2
- K835 White Silicone Gasket Type 2
- K186 Orifice Plate- Viton S/S
- K772 Orifice Plate- Solid PTFE
- K747 Screen Disk -Viton
- K773 Screen Mesh -Viton
K738 White Viton Gasket
K738 White Viton Gasket
K837 Nitrile Gasket
K852 EPDM Gasket
K839 Silicone Gasket Platinum Cured
K829 Solid Teflon Gasket
K831 Envelope Gasket Viton Inner K828 Envelope Gasket EPDM Inner
K737 White Viton Gasket
K834 Green Viton Gasket
K830 Nitrile Gasket Type 2
K832 EPDM Gasket Type 2
K835 White Silicone Gasket Type 2
K186 Orifice Plate- Viton S/S
K772 Orifice Plate- Solid PTFE
K747 Screen Disk -Viton
(Standard = 10 Mesh)
**PLEASE STATE MESH SIZE REQUIRED **
THE FINER DETAILS...
K839 Silicone Gasket Platinum Cured Type 1
Biobore Elastomer & Thermoplastic Characteristics
All materials are approved by: 3A, USDA, and comply with FDA’s Code of Federal Register – Title 21, Part 177.
PTFE GASKETS – LIMITED USE NOTE
PSI Service Ratings for clamps DO NOT APPLY to 1” and above connections incorporating PTFE gaskets. PTFE is virtually incompressible and tends to “cold flow” under normal operating conditions. PTFE gaskets, when used with any standard clamp, are likely to leak at pressures below the published service ratings.
To avoid possible leakage problems, we recommend consulting SFL before considering the use of PTFE material. This limitation does not apply to 0.5” and 0.75” Tube OD fittings and connections, due to the recessed, full-containment design of Fractional end connections.
Consists of a PTFE outer jacket sandwiching a viton insert thus imparting some compressibility together with the excellent heat and steam resistant properties.
Stainless Fittings (SFL) and Dairy Pipe Lines (DPL) are manufacturers of a wide range of stainless steel fittings, valves and bespoke fabricated units for the Bio-Processing, Pharmaceutical, Food, and Drink industries. The companies are regularly assessed to the ISO 9001:2015 Quality Management standard.
As part of our ongoing commitment to quality, the company has invested in systems that enable the traceability of materials used in both standard and fabricated products. These systems provide for the recording and reporting of quality and inspection data from various points on the manufacturing cycle.
Products meeting the ASME Bio Processing Equipment standard (BPE), will always be accompanied by full material certificates either with the goods or by email, or both if required. Where needed, SFL will provide a full quality dossier to cover project work.
The following process certificates can be made readily available when specified with the enquiry:
Welder approvals and weld procedures for each weld type and size of material.
A weld plan and weld log for each item including any weld filler rod if used.
CD Video files of each internal weld by its ID and part number immediately after welding.
Welding machine calibration certificates.
Orbital weld machine setting parameters and / or pre-weld coupons.
Surface Finish Certificates
A surface finish print-out for each item. A cleaning procedure document. A passivation certificate or electro polish certificate as required.
Functional Test Certificates
We will supply a pressure test certificate and pressure gauge calibration certificate to help with your obligations under the Pressure Equipment Directive. Additionally a dye penetrant test certificate or radiographic image and report can be supplied.
Declaration Documentation for EC Directives
Our valves meet the Pressure Equipment Directive (PED) and in some cases the Machinery Safety Directive (for powered valves). Selected valves are manufactured to comply with the ATmospheric EXplosive directive (ATEX). A safety declaration will be supplied in accordance with these directives.
Additionally, DPL offer a Certificate of Conformance for all products supplied. Certificates depicting seal type, FDA schedule number and operational pressure test are also available for all valves.
Stainless Fittings (SFL) and Dairy Pipe Lines (DPL) are manufacturers of a range of stainless steel fittings, valves and bespoke fabricated units for the bio-processing, pharmaceutical and food industries. The companies are regularly assessed to the ISO 9001:2015 Quality Management standard.
The products provided by the company meet the stringent statutory and regulatory requirements demanded by the marketplace. Inspections and product tests are carried out at regular stages of manufacture allowing comprehensive quality records to be maintained. These records can then be used for analysis as part of our commitment to ongoing process and product improvements. As part of this process, bi-monthly reviews are in place to ensure the quality system continues to support our business objectives.
With the processes of the Quality Management System defined and implemented, one major role of the management team is to adapt these processes to meet changing requirements in the industry and to enhance the business wherever this results in a benefit to our customers.
Our initial contact with our customers is normally through the Sales team. Here your precise requirements are assessed and stock availability discussed with you in order to meet your needs. Where you require us to make use of our fabrication facility, we take the time to understand your exact requirements even further.
After being sure that your sales contact has a clear understanding of your requirements, we conduct a Contract Review Meeting to ensure that the entire team responsible for manufacturing your order are all clear on what is needed.
We will contact you where we need further information or where we need specific points being clarified. All agreements are documented so you can be sure we have your requirements on board.
Material traceability is of prime importance to us, and therefore our internal bespoke systems and material identification allows us to trace material back to its origin.
SFL and DPL offer a wide range of certification options to include Certificates of Conformance, Original Material Certificates, EP or Passivation Certs, Weld maps, Qualifications and Procedures to name a few. Just discuss your requirements with us – our Mission is your Peace of Mind.
Click one of these links to view or download our EU Directive Statements for
OUR CUSTOMER’S THOUGHTS...
“DPL have been able to adapt to our stringent requirements in a timely and professional fashion. The quality of their work is of the highest standard. They are valued contributors to our development effort and I would very much recommend SFL for mission-critical applications.”
Mat Hery, Product Manager
Mat Hery, Product Manager
“Tell the lads they did an excellent job"
Steve Oates, Hosokawa
“We have not faced any issues at all whilst dealing with SFL and we very much appreciate the quick response & actions on our queries or orders.”
Jagadeesh Biradar, Millipore (India)
“Excellent service levels – many thanks”
Martin Wren, Buyer, Orbital Fabrications (DPL)
“You guys have done a fantastic job on the welding, we have had various people comment on the piece of equipment we are building with a components you guys have supplied and welded, it really does look the business!”
Jose Pena, R A Jones & Co.
“I would like to take this opportunity on behalf of SNF UK to thank Stainless Fittings for your continued and valuable support during a recent venture to redesign one of our existing units. The professionalism shown, along with the design input and quality in manufacturing allowed us to meet our required testing schedule. The success of this project will undoubtedly change the way we develop other units going forward.
In view of your performance we would certainly continue to use SFL on future projects and also for the supply of the systems that we developed together. We would recommend your services to others.
Once again we thank you for your efforts and look forward to working with you in the future”
Neil Hampshire, SNF
"Stainless Fittings are a supplier of quality to Loma Systems. They are always communicative and issues with them, which are rare, are always quickly and finitely resolved to our satisfaction.”
Loma Systems, an ITW Company
“We received your fabricated items this morning so just wanted to thank you for your prompt delivery, excellent workmen-ship / finish and your necessary assistance to achieve the end results”
Colin Samuels, Proposal Manager. Fluid Handling Solutions
“Thank you so much for all your help with today’s certificates, I just wanted to say that you have been most helpful with our recent procedural changes. Many thanks for all your efforts.”
Austen Roper, Inspection Dept. Orbital Fabrications
“Thank you for sending our certs through so promptly. As always, great service from DPL”
Petra Hall, Operations Manager, Biotechflow Ltd
“Great to find a company that says what it means, means what it says and delivers what it promises”
Claud Leonard, Apex Process Technology
“I want to really thank-you for your prompt help and understanding. I greatly appreciate the extra efforts, time and labour you are putting in for us.
I now know who to come to who understands our business and responds professionally and empathically. Thanks again”
Martin Hoffman, Managing Director, Biotechflow
“I would like to say a big thank you to Marcia Aislabie who has been a real treasure from start to finish when placing my order. I was unsure of what I required and she guided me through the lines you carry until we had reached what I required and then arranged an earlier delivery time because I explained it was urgent. She has been a credit to your company and if this is your level of customer care I would happily recommend your company to any of my colleagues and I will certainly be using your services again in the future.”
June Speller, Procurement Buyer, Martindale Pharma
Goods delivered, thanks for your excellent service.
Glyn, Sector Manager, Element.
“Thank you for your prompt efficient service”