b9_3 (1)

Reducing Cross

Reducing Cross

 

Dimension A Dimension B
0.375 x 0.25 RC0402WWWW 44.5 44.5
0.50 x 0.25 RC0502WWWW 47.6 47.6
0.50 x 0.375 RC0504WWWW 47.6 47.6
0.75 x 0.25 RC0702WWWW 50.8 50.8
0.75 x 0.375 RC0704WWWW 50.8 50.8
0.75 x 0.50 RC0705WWWW 50.8 50.8
1.0 x 0.25 RC1002WWWW 54.0 54.0
1.0 x 0.375 RC1004WWWW 54.0 54.0
1.0 x 0.5 RC1005WWWW 54.0 54.0
1.0 x 0.75 RC1007WWWW 54.0 54.0
1.5 x 0.5 RC1505WWWW 60.3 60.3
1.5 x 0.75 RC1507WWWW 60.3 60.3
1.5 x 1.0 RC1510WWWW 60.3 60.3
2.0 x 0.5 RC2005WWWW 73.0 66.7
2.0 x 0.75 RC2007WWWW 73.0 66.7
2.0 x 1.0 RC2010WWWW 73.0 66.7
2.0 x 1.5 RC2015WWWW 73.0 66.7
2.5 x 0.5 RC2505WWWW 79.4 73.0
2.5 x 0.75 RC2507WWWW 79.4 73.0
2.5 x 1.0 RC2510WWWW 79.4 73.0
2.5 x 1.5 RC2515WWWW 79.4 73.0
2.5 x 2.0 RC2520WWWW 79.4 73.0
3.0 x 0.5 RC3005WWWW 85.7 79.4
3.0 x 0.75 RC3007WWWW 85.7 79.4
3.0 x 1.0 RC3010WWWW 85.7 79.4
3.0 x 1.5 RC3015WWWW 85.7 79.4
3.0 x 2.0 RC3020WWWW 85.7 79.4
3.0 x 2.5 RC3025WWWW 85.7 79.4
4.0 x 0.5 RC4005WWWW 104.8 92.1
4.0 x 0.75 RC4007WWWW 104.8 92.1
4.0 x 1.0 RC4010WWWW 104.8 92.1
4.0 x 1.5 RC4015WWWW 104.8 92.1
4.0 x 2.0 RC4020WWWW 104.8 98.4
4.0 x 2.5 RC4025WWWW 104.8 98.4
4.0 x 3.0 RC4030WWWW 104.8 98.4
6.0 x 2.0 RC6020WWWW 142.9 130.2
6.0 x 2.5 RC6025WWWW 142.9 130.2
6.0 x 3.0 RC6030WWWW 142.9 130.2
6.0 x 4.0 RC6040WWWW 142.9 130.2

 

THE FINER DETAILS...

Reducing Cross

Reducing Cross

 

Dimension A Dimension B
0.375 x 0.25 RC0402WWWW 44.5 44.5
0.50 x 0.25 RC0502WWWW 47.6 47.6
0.50 x 0.375 RC0504WWWW 47.6 47.6
0.75 x 0.25 RC0702WWWW 50.8 50.8
0.75 x 0.375 RC0704WWWW 50.8 50.8
0.75 x 0.50 RC0705WWWW 50.8 50.8
1.0 x 0.25 RC1002WWWW 54.0 54.0
1.0 x 0.375 RC1004WWWW 54.0 54.0
1.0 x 0.5 RC1005WWWW 54.0 54.0
1.0 x 0.75 RC1007WWWW 54.0 54.0
1.5 x 0.5 RC1505WWWW 60.3 60.3
1.5 x 0.75 RC1507WWWW 60.3 60.3
1.5 x 1.0 RC1510WWWW 60.3 60.3
2.0 x 0.5 RC2005WWWW 73.0 66.7
2.0 x 0.75 RC2007WWWW 73.0 66.7
2.0 x 1.0 RC2010WWWW 73.0 66.7
2.0 x 1.5 RC2015WWWW 73.0 66.7
2.5 x 0.5 RC2505WWWW 79.4 73.0
2.5 x 0.75 RC2507WWWW 79.4 73.0
2.5 x 1.0 RC2510WWWW 79.4 73.0
2.5 x 1.5 RC2515WWWW 79.4 73.0
2.5 x 2.0 RC2520WWWW 79.4 73.0
3.0 x 0.5 RC3005WWWW 85.7 79.4
3.0 x 0.75 RC3007WWWW 85.7 79.4
3.0 x 1.0 RC3010WWWW 85.7 79.4
3.0 x 1.5 RC3015WWWW 85.7 79.4
3.0 x 2.0 RC3020WWWW 85.7 79.4
3.0 x 2.5 RC3025WWWW 85.7 79.4
4.0 x 0.5 RC4005WWWW 104.8 92.1
4.0 x 0.75 RC4007WWWW 104.8 92.1
4.0 x 1.0 RC4010WWWW 104.8 92.1
4.0 x 1.5 RC4015WWWW 104.8 92.1
4.0 x 2.0 RC4020WWWW 104.8 98.4
4.0 x 2.5 RC4025WWWW 104.8 98.4
4.0 x 3.0 RC4030WWWW 104.8 98.4
6.0 x 2.0 RC6020WWWW 142.9 130.2
6.0 x 2.5 RC6025WWWW 142.9 130.2
6.0 x 3.0 RC6030WWWW 142.9 130.2
6.0 x 4.0 RC6040WWWW 142.9 130.2

 

DOWNLOAD CATALOGUE

Download the catalogue by simply completing your details below

DOWNLOAD CATALOGUE WITH SELECT

Name
Name

Certification

Certification for DPL Products

From the vast array of published standards there are a number that are key to each industry. The accepted way of confirming that the standard has been complied with is for the manufacturer or service provider to issue a form of certificate with the goods or service.

There are many types of certificate but typically they can be categorised as Certificates of compliance, Test certificates, Inspection certificates or reports and Certificates of acquired skill or attainment.

DPL is an assessed company to the ISO 9001:2015 Quality Assurance standard and certifies that its products meet the relevant standards the product was designed for and also where modifications are made to suit a specific purpose.   We provide a Certificate of Conformance with each order dispatched.   Our seal and gasket components are food contact safe and we provide certification for these that states the relevant FDA schedule number for the material.

Valve Test Certificate is available for all DPL supplied valves.   This will supply information on the materials used, the seal material and seal standards, the method of test and the test pressures, and the internal surface finish.   Component Material certificates for the product wetted surfaces of the valve are also available with this certificate.

EU safety law

A statement of compliance is normally a legal requirement evoked by a European Directive.   DPL issue these with every valve and actuator in line with the requirements of the particular commodity type along with our recommended valve installation procedures.

Some of the legislation affecting DPL products includes the Pressure Equipment Directive (PED), designed for pressure bearing products safety and the Machinery Directive that requires the design of the machinery is safe to operate and presents no hazard in operation.

DPL produces valves that comply with the electrical bias ATEX directive, for safety of operation in potentially explosive atmospheres which also seeks to prevent ignition through static discharge on non electrical products.

There are many other specialist certificates that have not been covered above.   If you require a particular approval certificate for the components we can supply for your installation please enquire at the time of order with your DPL Sales contact.

Quality

Stainless Fittings (SFL) and Dairy Pipe Lines (DPL) are manufacturers of a range of stainless steel fittings, valves and bespoke fabricated units for the bio-processing, pharmaceutical and food industries. The companies are regularly assessed to the ISO 9001:2015 Quality Management standard.

The products provided by the company meet the stringent statutory and regulatory requirements demanded by the marketplace.  Inspections and product tests are carried out at regular stages of manufacture allowing comprehensive quality records to be maintained. These records can then be used for analysis as part of our commitment to ongoing process and product improvements. As part of this process, bi-monthly reviews are in place to ensure the quality system continues to support our business objectives.

With the processes of the Quality Management System defined and implemented, one major role of the management team is to adapt these processes to meet changing requirements in the industry and to enhance the business wherever this results in a benefit to our customers.

Our initial contact with our customers is normally through the Sales team. Here your precise requirements are assessed and stock availability discussed with you in order to meet your needs. Where you require us to make use of our fabrication facility, we take the time to understand your exact requirements even further.
After being sure that your sales contact has a clear understanding of your requirements, we conduct a Contract Review Meeting to ensure that the entire team responsible for manufacturing your order are all clear on what is needed.
We will contact you where we need further information or where we need specific points being clarified. All agreements are documented so you can be sure we have your requirements on board.

Material traceability is of prime importance to us, and therefore our internal bespoke systems and material identification allows us to trace material back to its origin.

SFL and DPL offer a wide range of certification options to include Certificates of Conformance, Original Material Certificates, EP or Passivation Certs, Weld maps, Qualifications and Procedures to name a few. Just discuss your requirements with us – our Mission is your Peace of Mind.

Click one of these links to view or download our EU Directive Statements for

Enquiry / CAD Request DPL

Address(Required)

OUR CUSTOMER’S THOUGHTS...