Gaskets | Stainless Fittings

Stainless Fittings. Reliability and performance you can trust


NON ASME BPE PRODUCTS

Gaskets




K738 White Viton Gasket
Type 1

Size (ins) Part Code
0.5 K738 05 08G
0.75 K738 07 08G
1.0 K738 10 08G
1.5 K738 15 08G
2.0 K738 20 08G
2.5 K738 25 08G
3.0 K738 30 08G
4.0 K738 40 08G

 





 

K837 Nitrile Gasket
Type 1

Size (ins) Part Code
1.0 K837 10 08G
1.5 K837 15 08G
2.0 K837 20 08G
2.5 K837 25 08G
3.0 K837 30 08G
4.0 K837 40 08G

 





 

K852 EPDM Gasket
Type 1

Size (ins) Part Code
1.0 K852 10 08G
1.5 K852 15 08G
2.0 K852 20 08G
2.5 K852 25 08G
3.0 K852 30 08G
4.0 K852 40 08G

 





K839 Silicone Gasket Platinum Cured
Type 1

Size (ins) Part Code
0.5 K839 05 08G
0.75 K839 07 08G
1.0 K839 10 08G
1.5 K839 15 08G
2.0 K839 20 08G
2.5 K839 25 08G
3.0 K839 30 08G
4.0 K839 40 08G

K829 Solid Teflon Gasket

Size (ins) Size Code
0.5 05 10G
0.75 07 10G
1.0 10 10G
1.5 15 10G
2.0 20 10G
2.5 25 10G
3.0 30 10G
4.0 40 10G

 




 

K831 Envelope Gasket Viton Inner K828 Envelope Gasket EPDM Inner

Size (ins) Size Code
0.5 05 10G
0.75 07 10G
1.0 10 10G
1.5 15 10G
2.0 20 10G
2.5 25 10G
3.0 30 10G
4.0 40 10G

 





 

K737 White Viton Gasket
Type 2

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

 




K834 Green Viton Gasket
Type 2

Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G




 

K830 Nitrile Gasket Type 2

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

 



K832 EPDM Gasket Type 2

Size (ins) Size Code
0.5 05 08G
0.75 07 08G
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

 




 

K835 White Silicone Gasket Type 2

Size (ins) Size Code
1.0 10 08G
1.5 15 08G
2.0 20 08G
2.5 25 08G
3.0 30 08G
4.0 40 08G

 

Biobore Elastomer & Thermoplastic Characteristics

 

All materials are approved by: 3A, USDA, and comply with FDA’s Code of Federal Register - Title 21, Part 177.

PTFE GASKETS – LIMITED USE NOTE
PSI Service Ratings for clamps DO NOT APPLY to 1” and above connections incorporating PTFE gaskets. PTFE is virtually incompressible and tends to “cold flow” under normal operating conditions. PTFE gaskets, when used with any standard clamp, are likely to leak at pressures below the published service ratings.
To avoid possible leakage problems, we recommend consulting SFL before considering the use of PTFE material. This limitation does not apply to 0.5” and 0.75” Tube OD fittings and connections, due to the recessed, full-containment design of Fractional end connections.

ENVELOPE GASKETS
Consists of a PTFE outer jacket sandwiching a viton insert thus imparting some compressibility together with the excellent heat and steam resistant properties.



K186 Orifice Plate- Viton S/S

Size (ins) Part Code
1.0 K186 10 08G
1.5 K186 15 08G
2.0 K186 20 08G
2.5 K186 25 08G
3.0 K186 30 08G
4.0 K186 40 08G

 





K772 Orifice Plate- Solid PTFE

Size (ins) Part Code
0.5 K772 05 10G
0.75 K772 07 10G
1.0 K772 10 10G
1.5 K772 15 10G
2.0 K772 20 10G
2.5 K772 25 10G
3.0 K772 30 10G
4.0 K772 40 10G

 





K747 Screen Disk -Viton

Size (ins) Part Code
1.0 K747 10 08G
1.5 K747 15 08G
2.0 K747 20 08G
2.5 K747 25 08G
3.0 K747 30 08G
4.0 K747 40 08G

 

 





K773 Screen Mesh -Viton

Size (ins) Part Code
1.0 K773 10 08G
1.5 K773 15 08G
2.0 K773 20 08G
2.5 K773 25 08G
3.0 K773 30 08G
4.0 K773 40 08G