Talk to us on
Clamp Ferrule – Short (K125)
|Size (ins)||Part Code||A (mm)||B (mm)|
|Size (ins)||Part Code||A (mm)||B (mm)|
|Size (ins)||Part Code||A (mm)||B (mm)||C (mm)||D (mm)|
Clamp Ferrule (K124)
THE FINER DETAILS...
Certification for DPL Products
From the vast array of published standards there are a number that are key to each industry. The accepted way of confirming that the standard has been complied with is for the manufacturer or service provider to issue a form of certificate with the goods or service.
There are many types of certificate but typically they can be categorised as Certificates of compliance, Test certificates, Inspection certificates or reports and Certificates of acquired skill or attainment.
DPL is an assessed company to the ISO 9001:2015 Quality Assurance standard and certifies that its products meet the relevant standards the product was designed for and also where modifications are made to suit a specific purpose. We provide a Certificate of Conformance with each order dispatched. Our seal and gasket components are food contact safe and we provide certification for these that states the relevant FDA schedule number for the material.
A Valve Test Certificate is available for all DPL supplied valves. This will supply information on the materials used, the seal material and seal standards, the method of test and the test pressures, and the internal surface finish. Component Material certificates for the product wetted surfaces of the valve are also available with this certificate.
EU safety law
A statement of compliance is normally a legal requirement evoked by a European Directive. DPL issue these with every valve and actuator in line with the requirements of the particular commodity type along with our recommended valve installation procedures.
Some of the legislation affecting DPL products includes the Pressure Equipment Directive (PED), designed for pressure bearing products safety and the Machinery Directive that requires the design of the machinery is safe to operate and presents no hazard in operation.
DPL produces valves that comply with the electrical bias ATEX directive, for safety of operation in potentially explosive atmospheres which also seeks to prevent ignition through static discharge on non electrical products.
There are many other specialist certificates that have not been covered above. If you require a particular approval certificate for the components we can supply for your installation please enquire at the time of order with your DPL Sales contact.
Stainless Fittings (SFL) and Dairy Pipe Lines (DPL) are manufacturers of a range of stainless steel fittings, valves and bespoke fabricated units for the bio-processing, pharmaceutical and food industries. The companies are regularly assessed to the ISO 9001:2015 Quality Management standard.
The products provided by the company meet the stringent statutory and regulatory requirements demanded by the marketplace. Inspections and product tests are carried out at regular stages of manufacture allowing comprehensive quality records to be maintained. These records can then be used for analysis as part of our commitment to ongoing process and product improvements. As part of this process, bi-monthly reviews are in place to ensure the quality system continues to support our business objectives.
With the processes of the Quality Management System defined and implemented, one major role of the management team is to adapt these processes to meet changing requirements in the industry and to enhance the business wherever this results in a benefit to our customers.
Our initial contact with our customers is normally through the Sales team. Here your precise requirements are assessed and stock availability discussed with you in order to meet your needs. Where you require us to make use of our fabrication facility, we take the time to understand your exact requirements even further.
After being sure that your sales contact has a clear understanding of your requirements, we conduct a Contract Review Meeting to ensure that the entire team responsible for manufacturing your order are all clear on what is needed.
We will contact you where we need further information or where we need specific points being clarified. All agreements are documented so you can be sure we have your requirements on board.
Material traceability is of prime importance to us, and therefore our internal bespoke systems and material identification allows us to trace material back to its origin.
SFL and DPL offer a wide range of certification options to include Certificates of Conformance, Original Material Certificates, EP or Passivation Certs, Weld maps, Qualifications and Procedures to name a few. Just discuss your requirements with us – our Mission is your Peace of Mind.
Click one of these links to view or download our EU Directive Statements for
OUR CUSTOMER’S THOUGHTS...
“DPL have been able to adapt to our stringent requirements in a timely and professional fashion. The quality of their work is of the highest standard. They are valued contributors to our development effort and I would very much recommend SFL for mission-critical applications.”
Mat Hery, Product Manager
Mat Hery, Product Manager
“Tell the lads they did an excellent job"
Steve Oates, Hosokawa
“We have not faced any issues at all whilst dealing with SFL and we very much appreciate the quick response & actions on our queries or orders.”
Jagadeesh Biradar, Millipore (India)
“Excellent service levels – many thanks”
Martin Wren, Buyer, Orbital Fabrications (DPL)
“You guys have done a fantastic job on the welding, we have had various people comment on the piece of equipment we are building with a components you guys have supplied and welded, it really does look the business!”
Jose Pena, R A Jones & Co.
“I would like to take this opportunity on behalf of SNF UK to thank Stainless Fittings for your continued and valuable support during a recent venture to redesign one of our existing units. The professionalism shown, along with the design input and quality in manufacturing allowed us to meet our required testing schedule. The success of this project will undoubtedly change the way we develop other units going forward.
In view of your performance we would certainly continue to use SFL on future projects and also for the supply of the systems that we developed together. We would recommend your services to others.
Once again we thank you for your efforts and look forward to working with you in the future”
Neil Hampshire, SNF
"Stainless Fittings are a supplier of quality to Loma Systems. They are always communicative and issues with them, which are rare, are always quickly and finitely resolved to our satisfaction.”
Loma Systems, an ITW Company
“We received your fabricated items this morning so just wanted to thank you for your prompt delivery, excellent workmen-ship / finish and your necessary assistance to achieve the end results”
Colin Samuels, Proposal Manager. Fluid Handling Solutions
“Thank you so much for all your help with today’s certificates, I just wanted to say that you have been most helpful with our recent procedural changes. Many thanks for all your efforts.”
Austen Roper, Inspection Dept. Orbital Fabrications
“Thank you for sending our certs through so promptly. As always, great service from DPL”
Petra Hall, Operations Manager, Biotechflow Ltd
“Great to find a company that says what it means, means what it says and delivers what it promises”
Claud Leonard, Apex Process Technology
“I want to really thank-you for your prompt help and understanding. I greatly appreciate the extra efforts, time and labour you are putting in for us.
I now know who to come to who understands our business and responds professionally and empathically. Thanks again”
Martin Hoffman, Managing Director, Biotechflow
“I would like to say a big thank you to Marcia Aislabie who has been a real treasure from start to finish when placing my order. I was unsure of what I required and she guided me through the lines you carry until we had reached what I required and then arranged an earlier delivery time because I explained it was urgent. She has been a credit to your company and if this is your level of customer care I would happily recommend your company to any of my colleagues and I will certainly be using your services again in the future.”
June Speller, Procurement Buyer, Martindale Pharma
Goods delivered, thanks for your excellent service.
Glyn, Sector Manager, Element.
“Thank you for your prompt efficient service”