Bends-DT7_DT16

180 Degree Bend / Outlet Loop C/C/C

The clamp ended Outlet Loop is a 180 degree bend with a reduced size bottom outlet and tri-clamp ferrule ends all round. Butt weld/clamp ends are also available. Available from 1” to 4” and both SF1 and SF4 surface finishes.

Talk to us on

THE FINER DETAILS...

180 Degree Bend / Outlet Loop C/C/C

  • ASME BPE

    The American Society of Mechanical Engineers have developed a standard for Tubing and Fittings used in the Pharmaceutical Industry (ASME Bioprocessing Equipment). This covers all aspects of the manufacturing process including finishes, tolerances and dimensions.

  • ISO QUALITY SYSTEM

    To ensure that we constantly maintain the standards stated our manufacturing and Quality System conforms to ISO 9001-2015.
    SFL have a continual commitment to quality and the system is audited internally and externally.

  • PRODUCT RANGE

    Product range covers sizes from 1/4” O.D. to 6” O.D. in tubing, weld end fittings suitable for orbital welding and clamp ended fittings.

  • DIMENSIONAL TOLERANCES

    Tolerances on weld ended products are suitable for closed head orbital welding. Tolerances on squareness and wall thickness
    comply with ASME BPE.

  • SURFACE FINISH

    Choice of mechanical finish and electropolished finish on I.D. Finish on O.D. to suit customers requirements either Mill finish or sateen polished.See table below for surface finish designations for tube and fittings.

  • CONTROLLED CHEMICAL ANALYSIS

    All contact parts are manufactured from T316L quality materials. Sulphur is controlled at weld point to 0.005% minimum and 0.017% maximum to ensure good quality orbital welds. Part of our Quality Control is to check that the raw materials purchased conform to the Chemical Analysis stated on the Material Certificate, this is carried out by an independent laboratory.

  • TRACEABILITY

    All materials are traceable back to the original Material Certificates. To ensure full traceability SFL mark all T316L products with an internal reference number in addition to their cast/heat number.

  • MARKINGS

    All products are marked with cast/heat number, internal reference number and SFL logo.

  • PACKAGING

    Tubing is supplied with ends capped and sleeved in polythene, end heat sealed. Fittings are capped and heat sealed in polythene.

DT7 – 88 degree bend W/W (DT-4.1.1-9)✓ ASME BPE

DT7 – 90 degree bend W/W (DT-4.1.1-1)✓ ASME BPE

DT7 – 92 degree bend W/W (DT-4.1.1-10)✓ ASME BPE

DT12 – 90 Degree bend C/W (DT-4.1.1-2)✓ ASME BPE

DT16 – 90 Degree bend C/C (DT-4.1.1-3)✓ ASME BPE

DT8 – 45 Degree bend WW (DT-4.1.1-4)✓ ASME BPE

DT13 – 45 Degree Bend C/W (DT-4.1.1-5)✓ ASME BPE

DT17 – 45 Degree Bend C/C (DT-4.1.1-6)✓ ASME BPE

Outlet Loop W/W/C

Outlet Loop C/C/C

DOWNLOAD SFL CATALOGUE

Get the catalogue now by simply completing your details below, then check your email inbox.

DOWNLOAD CATALOGUE SFL

Name(Required)
Name(Required)
This field is for validation purposes and should be left unchanged.

Certification

Stainless Fittings (SFL) and Dairy Pipe Lines (DPL) are manufacturers of a wide range of stainless steel fittings, valves and bespoke fabricated units for the Bio-Processing, Pharmaceutical, Food, and Drink industries. The companies are regularly assessed to the ISO 9001:2015 Quality Management standard.

As part of our ongoing commitment to quality, the company has invested in systems that enable the traceability of materials used in both standard and fabricated products. These systems provide for the recording and reporting of quality and inspection data from various points on the manufacturing cycle.

Products meeting the ASME Bio Processing Equipment standard (BPE), will always be accompanied by full material certificates either with the goods or by email, or both if required. Where needed, SFL will provide a full quality dossier to cover project work.

The following process certificates can be made readily available when specified with the enquiry:

  • Welding Certificates

  • Welder approvals and weld procedures for each weld type and size of material.

  • A weld plan and weld log for each item including any weld filler rod if used.

  • CD Video files of each internal weld by its ID and part number immediately after welding.

  • Welding machine calibration certificates.

  • Orbital weld machine setting parameters and / or pre-weld coupons.

Surface Finish Certificates

A surface finish print-out for each item. A cleaning procedure document. A passivation certificate or electro polish certificate as required.

Functional Test Certificates

We will supply a pressure test certificate and pressure gauge calibration certificate to help with your obligations under the Pressure Equipment Directive.  Additionally a dye penetrant test certificate or radiographic image and report can be supplied.

Declaration Documentation for EC Directives

Our valves meet the Pressure Equipment Directive (PED) and in some cases the Machinery Safety Directive (for powered valves). Selected valves are manufactured to comply with the ATmospheric EXplosive directive (ATEX). A safety declaration will be supplied in accordance with these directives.

Additionally, DPL offer a Certificate of Conformance for all products supplied. Certificates depicting seal type, FDA schedule number and operational pressure test are also available for all valves.

Quality

Stainless Fittings (SFL) and Dairy Pipe Lines (DPL) are manufacturers of a range of stainless steel fittings, valves and bespoke fabricated units for the bio-processing, pharmaceutical and food industries. The companies are regularly assessed to the ISO 9001:2015 Quality Management standard.

The products provided by the company meet the stringent statutory and regulatory requirements demanded by the marketplace.  Inspections and product tests are carried out at regular stages of manufacture allowing comprehensive quality records to be maintained. These records can then be used for analysis as part of our commitment to ongoing process and product improvements. As part of this process, bi-monthly reviews are in place to ensure the quality system continues to support our business objectives.

With the processes of the Quality Management System defined and implemented, one major role of the management team is to adapt these processes to meet changing requirements in the industry and to enhance the business wherever this results in a benefit to our customers.

Our initial contact with our customers is normally through the Sales team. Here your precise requirements are assessed and stock availability discussed with you in order to meet your needs. Where you require us to make use of our fabrication facility, we take the time to understand your exact requirements even further.
After being sure that your sales contact has a clear understanding of your requirements, we conduct a Contract Review Meeting to ensure that the entire team responsible for manufacturing your order are all clear on what is needed.
We will contact you where we need further information or where we need specific points being clarified. All agreements are documented so you can be sure we have your requirements on board.

Material traceability is of prime importance to us, and therefore our internal bespoke systems and material identification allows us to trace material back to its origin.

SFL and DPL offer a wide range of certification options to include Certificates of Conformance, Original Material Certificates, EP or Passivation Certs, Weld maps, Qualifications and Procedures to name a few. Just discuss your requirements with us – our Mission is your Peace of Mind.

Click one of these links to view or download our EU Directive Statements for

Enquiry / CAD Request SFL

Address
This field is for validation purposes and should be left unchanged.